Circuit Board Engraving Machine

Digunakan sebagai meja kerja dalam pembuatan rangkaian elektronika. Dilengkapi dengan alat ukur dan alat bantu kerja.

Technical Parameter
The finest processing conductor width/spacing : approx. 0.1mm(4mil)
Processing minimum hole diameter : 0.2mm (8mil)
Processing format: approx. 305mm x 230mm
Using Germany high-speed electric spindle with speed : approx. 60000rpm
Repeat positioning accuracy : ≤±5μm
System positioning accuracy : ≤±20μm
Contour through the milling speed : approx. 6mm/s